The below notes contain summaries of the recent changes and software enhancements made available in the latest AMPAREX LTS release.
There is also a small change modification concerning the version number of this new release as well. Up until now we have only used number combinations like: 4.7, 4.8 etc. to describe and differentiate between the releases.
In order to better describe and classify define a version release in terms of time, a year and the corresponding quarter of the that year similar version numbering will be used to number a release from now on, example: LTS2020q4LTS-2021.4
LTS stands for a Long Term Support release and STS for a Short Term Support.
Table of
Contentscontents:
Inhalt maxLevel 1 style circle printable false
Numbered Headings | ||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
GeneralNew password guidelines
AMPAREX new start
Displaying the release notes
Multilingual SMS appointment reminder
Eine erste kleine Änderung betrifft die AMPAREX Versionsnummer. Bisher wurde diese zu nachträglich nicht näher bestimmbaren Zeitpunkten hochgezählt. Zuletzt war diese 4.9 bzw. 4.10. Um eine Version zeitlich besser einordnen zu können wird nun die Jahreszahl und das entsprechende Quartal verwendet, z. B. 2021.2 AllgemeinesNeue Passwort Richtlinien (AX-10207)
| ||||||||||||||||||||||
Änderungsgrund AMPAREX ist ein Onlinesystem in dem u. a. Medizindaten von Endkunden gespeichert werden. Aus diesem Grund sollten alle Zugänge mit einem Passwort gesichert sein. Dies war bisher schon möglich. Allerdings basierte die Passwortvergabe nach einem Punktesystem. Dieses Punktesystem zur Vergabe eines Passwortes ist allerdings nicht mehr zeitgemäß. Zu dem konnte man die Passworteingabe auch deaktivieren. | ||||||||||||||||||||||
Verwendung Aus den genannten Gründen, hat AMPAREX die Passwortrichtlinien angepasst. D. h. ab dem 10.01.2022 wird der Benutzer aufgefordert sein Passwort zu ändern, wenn dieses nicht den neuen Passwortrichtlinien entspricht. Wird das Passwort nicht geändert, erscheint die Meldung bis zum 01.07.2022. Ab diesem Stichtag ist ein Aufschieben der Änderung nicht mehr möglich. D. h. der Benutzer wird abgemeldet und aufgefordert, das Passwort zu ändern. Ein Weiterarbeiten ist dann ohne Passwortänderung nicht mehr möglich. Daher muss ab dem 01.07.2022 das Anmeldepasswort für einen AMPAREX Benutzer folgenden Kriterien entsprechen:
Bei der Vergabe eines neuen Passworts, wird während der Eingabe geprüft, ob jede Anforderungen erfüllt ist und per grünem Haken Die Möglichkeit zur Vorgabe der Passwortstärke in den Filialketteneinstellungen entfällt. | ||||||||||||||||||||||
Voraussetzung(en)
| ||||||||||||||||||||||
Verfügbar ab Version 2021.4 | ||||||||||||||||||||||
Reason for change If users wanted to switch between branches AMPAREX had to be restarted. Depending on the number of icons user had on their desktops, this could take some time. | ||||||||||||||||||||||
Solution AMPAREX can be restarted directly from the >>Help menu. | ||||||||||||||||||||||
Available from Version 2021.2 | ||||||||||||||||||||||
Solution A change log dialogue can be displayed on users PCs with each start of AMPAREX. As the change log is only available in the German language the feature has been switched off on your respective country server. The display of the log can be activated under >>My AMPAREX >>Administration >>Display change log for new version (in German). Furthermore, the release notes can be called up at any time via the Help menu. | ||||||||||||||||||||||
Available from Version 2021.3 |
Solution In multilingual countries, regions an SMS appointment notification can be sent in the customer’s respective language directly from the appointment. | |
Requirement(s)
<meta name="targetlanguage" content="$ersterwert(empfänger/landessprache,absender/landessprache)/auswahl('en','fr','de')"/> | |
AvailableAvailability from Version 2021.1 |
AMPAREX Messages
Solution We at AMPAREX would like to have an option to send important messages to the AMPAREX users of AMPAREX application (e.g. server restart needed, sudden system faults). No advertising is going to be sent while using this function. So rather then to solely rely on email communication we’d like to have an option to sent important information on a user level. Receiving messages can be still customised either for the whole company under >>Branch office administration >>My AMPAREX or for each user under >>My AMPAREX >>Administration >>Notifications. In other words you can still decide if you want to use this feature or not. No advertising is going to be sent while using this function.
| ||||||
AvailableAvailability from Version 2021.3 |
Master data
Chargennummer und MHD (AX-10159)
Batch number and expiry date
Reason for change For a better traceability and/or for recall actions of articles with a limited shelf life, it is important to be able to enter a batch number and/or an expiry date, where applicable Änderungsgrund Für die Nachverfolgbarkeit bzw. Rückholaktionen von Artikel mit begrenzter Haltbarkeit ist es wichtig, ggf. eine Chargennummer und/oder ein Mindesthaltbarkeitsdatum eingeben zu können. | |
Verwendung Die Chargennummer und/oder Eingabe eines MHD (Mindesthaltbarkeitsdatums) ermöglicht die Nachverfolgung von Produkten einer Charge oder mit einer begrenzter Haltbarkeit:
Hierbei kann über AMPAREX gesteuert werden, ob ein Artikel mit einer Chargennummer und/oder MHD geführt werden kann (Lagerverwaltung | Stammdaten). Darüber hinaus kann über eine Filialkettenoption (Kasse | Filialverwaltung) gesteuert werden, ob beim Verkauf über die Barkasse die Angabe der Chargennummer und/oder MHD angegeben werden muss. Zu dem kann über den Artikelbestand über die Spalte 'MHD' gesehen werden, wo sich der Artikel befindet und ob dieser demnächst abläuft. Werden Artikel zusätzlich mit einer Chargennummer geführt, kann der Artikel im Falle eines Produktionsfehlers ermittelt und an den Hersteller zurück gesandt werden. | |
Voraussetzung(en)
| |
Verfügbar ab Version 2021.4 | |
Handbuch
| |
Solution The batch number and/or the expiry date enables article tracking within the following sections of AMPAREX:
AMPAREX can be used to control whether an article can be managed with a batch number and/or an expiry date (Inventory management | Master data). In addition, AMPAREX can control whether the batch number and/or expiry date must be specified when selling using the cash register (Till | Branch office administration). On the top of that >>Inventory management can be used to see where the article is currently located and whether it is about to expire by checking the expiry date column. If articles are also listed with a batch number, the article can be identified and returned to the manufacturer. | |
Requirement(s)
| |
Availability from Version 2021.4 |
Automatic Automatic article numbers
Reason for change By applying the >>Branch Office Administration option “Generate "Generate article number automatically”automatically", article numbers could be assigned automatically when new articles are created. Until now, however, it was not possible to specify which article number combination should be used to create the such article number. | |
Solution For the automatic assignment of article numbers, an article number combination to generate them can also be specified now. The article number combination can consist of placeholders and/or a free text. The placeholders 'p' (manufacturer short name), 's' (sub-type), 't' (item type) and/or 'Y' for the current year can be used. | |
Requirement(s)
| |
Availability from Version 2021.2 |
Different consignment
durationarrangements
Reason for change Until now, a consignment period arrangements for an article could only be defined on a supplier level. A different consignment period arrangements definition for one article was not possible. | |
Solution In addition to the consignment period arrangements defined for a supplier a different consignment period arrangements can be entered for an article or even article variant. | |
Requirement(s)
| |
AvailableAvailability from Version 2021.2 |
Restrict discounts to specific authorisation groups
Reason for change Discounts added on AMPAREX Until now discounts added under >>Master data >>Discounts were accessible for to all authorisation groups and couldn't be further restricted. | |
Solution Chosen discount can be accessible to permitted authorisation groups only now. This can be edited directly on the discount edit page. For example, it is possible that a certain discount may only be accessible to an employee belonging to the authorisation group “Audiologist”"Audiologist". Please note that during the creation each discount will be assigned to all authorisation groups by default. | |
Requirement(s)
| |
AvailableAvailability from Version 2021.2 |
Statistics and selections
Select multiple customers
Selling hearing or swim protection
Reason for change Until nowPreviously, multiple customers could only be added to a selection by repeatedly using the search criterion “Customer”you could only sell a hearing or swim protection on its own (outside of a hearing aid provision) by applying the article type "Accessory" to the affected articles. | |
Solution The search criterion “Customer”above option has been renamed to “Customers” in the new AMPAREX release. Using it now, one can choose several customers in one dialogue at once. It is also possible to use this criterion to scan customer numbers or barcodes using a scanner. | |
Requirement(s) from Version 2021.1 |
Branch office administration
Additional permissions
Reason for change
In AMPAREX, user group authorisations could only be assigned at the module, section or tab level. A finer subdivision of user rights was not possible in the past releases. For example, a user who had access to the “Invoice” tab could carry out all actions that were possible on this tab.
Solution
Starting with the new release more detailed authorisations can be assigned to each “Authorisation group” using the “Additional permissions” (options depend on the selection made in the authorisation menu) - e.g. the right to credit customer invoices.
Requirement(s)
- at least one additional authorisation group more than the default “Administrator” group added to the system.
Available
from Version 2021.3
also been made available for the article type "Earmould". If this type is set, the hearing or swim protection article will be automatically listed in the customer's hearing systems under "Accessories" after the sale. On the one hand a hearing and/or swimming protection (without hearing aid) can be easily sold and on the other hand repaired using a >>Repair process. However, the above only has an effect if the hearing or swim protection is sold separately, i.e. not in connection with a hearing aid provision. | |
Availability from Version 2021.4 |
Article variants - receivers
Reason for change When dispensing or reserving a hearing aid, one often need to select a receiver with. The respective receiver variants can be defined in the master data. However, if only hearing aids were selected during the provision, the receiver: a) would not be removed from the inventory b) the provision would not be documented correctly in the customer file. | |
Solution In order to improve the maintenance of receiver variants, it is now possible to save receivers as an additional variant selection on the hearing aid. This way, the receiver can be easily selected during dispensing or reservation. The selected variant will be carried over throughout the entire hearing aid treatment, i.e. right up to the completion of the hearing aid process. On the top of it it is possible to keep only one receiver model as a main article and add its variants onto the >>Article variants tab in the >>Master data. The main receiver model could then be added to the respective hearing aid models on the >>Article combinations tab. When reserving a respective hearing aid for a customer it would all nicely link in the >>Create reservation wizard |
Branch groups
Reason for change
Up to now, branches could only be marked as regular branches or head office branches. It was not possible to combine several (franchise) branches into one group.
Solution
Using the new branch groups, several branches can be combined into a group that, for example, can neither see the inventory nor the customers of another branch organisation. Branch group can be created in the >>Branch Office Management module and individual branches can be then assigned to such groups.
Availability
from Version 2021.2
Changelog for chain settings
Reason for change
Changes applied to the >>Chain settings could previously only be viewed by using the change log option in the statistics.
Solution
Changes applied to the >>Chain settings can be viewed directly by using the “Additional features” change log.
Requirement(s)
- at least one change applied to the >>Chain options.
Availability
from Version 2021.2
Article number search
Solution If the function “Search using article number in the article search field” is activated, an additional search using the article number can be carried out in the article catalogue. | |
Availability from Version 2021.2 |
Change customer status of several customers at once
Varying own contribution
Reason for change Article's own contribution could be attached to a sales price list. But up until now it was impossible to work with branch-varying own contributions. | |||
Solution Sales price lists can be assigned to branches now which means that a different own contribution can be calculated in each case - or one branch can work with the own contribution and another branch can sell the item at a fixed sales price. | |||
Requirement(s)
| Solution The “Additional functions” menu can be extended with a function “Change status” by applying an additional setting to the >>Master setting, namely “marketing_selection_modify_customer_status” and assigning a “true” value to it. After completion any status can be assigned to a selected group of customers. | ||
Availability from Version 2021.12 |
Inventur
Gespeicherte Parameter einer Inventur
Statistics and selections
Select multiple customers
Änderungsgrund Inventuren werden in AMPAREX angelegt und bearbeitet. Wollte man allerdings herausfinden, mit welchen Parametern diese Inventur erstellt wurde, war dies bis einschließlich der AMPAREX Version 4.9 nicht möglich. Bisher wurden die Parameter nicht gespeichert, mit der man eine Inventur angelegt hatte. Man konnte also nicht nachvollziehen, wie die Inventur angelegt wurde. | |
Verwendung Die Parameter, mit der eine Inventur (egal, ob manuell oder durch eine Vorlage) angelegt wurde, werden an der jeweiligen Inventur gespeichert und sind nachträglich einsehbar (Inventur → 'Mehr-Menü' → Inventurparameter anzeigen). | |
Voraussetzung(en)
| |
Verfügbar ab Version 2021.2 | |
Handbuch
|
Serviceverträge
Servicevertragsvorlagen mit Kundenprogramm
Änderungsgrund
Kundenbindungsprogramme und Serviceverträge können zusammen gehören, müssen aber bisher getrennt angelegt werden. Hierbei konnte es passieren, dass man nur einen Servicevertrag anlegt, aber das zugehörige Kundenbindungsprogramm vergaß oder umgekehrt.
Verwendung
An einer Servicevertragsvorlage kann ein vorhandenes Kundenbindungsprogramm hinterlegt werden. Wird über diese Vorlage ein Servicevertrag für einen Kunden angelegt, wird das hinterlegte Kundenbindungsprogramm automatisch beim gewählten Kunden erstellt und ist sofort aktiv.
Voraussetzung(en)
- mind. eine Servicevertragsvorlage mit einem Kundenbindungsprogramm
Verfügbar
ab Version 2021.2
Handbuch
- Dokumentation → Stammdaten → Servicevertragsvorlagen → Servicevertragsvorlage | Stammdaten
Preis im Servicevertrags-Wizard
Änderungsgrund
Ein Servicevertrag wird über einen Servicevertrags-Wizard angelegt, sofern es Vorlagen gibt. Im Wizard selbst wurden die Daten allerdings nicht zusammenfassend dargestellt.
Verwendung
Das Verhalten des Wizards wurde angepasst, sodass auf der ersten Seite des Wizards (Artikelauswahl) der Preis der jeweiligen Artikel aus den Stammdaten dargestellt wird. Diese Spalte wird allerdings nur angezeigt, wenn keine 'Preis-Formel' an der Servicevertragsvorlage hinterlegt ist. Auf der Seite 'Zusammenfassung' werden die wichtigsten Punkte nochmal als Information dargestellt. Diese sind: 'Start', 'Ende', 'Artikel', 'Preis', 'Abrechnungsmodus' (monatlich, jährlich) und die 'Zahlungsart' (Nur die Art, nicht die komplette Bankverbindung).
Voraussetzung(en)
- mind. eine Servicevertragsvorlage
Verfügbar
ab Version 2021.2
Handbuch
- Dokumentation → Kunden → Serviceverträge → Servicevertrag | Kunde
Laufzeit in Tagen
Änderungsgrund
Ein Servicevertrag wird über einen Servicevertrags-Wizard angelegt, sofern es mehrere Vorlagen gibt. Hierbei konnte die Laufzeit eines Servicevertrages nur in Monaten angegeben werden - eine Einschränkung, z. B. auf 14 Tage, war nicht möglich.
Verwendung
In der Servicevertragsvorlage kann die Laufzeit nicht nur in Monaten sondern auch in Tagen angegeben werden. Die Obergrenze einer Angabe in Tagen beträgt '1.000'.
Voraussetzung(en)
- mind. eine Servicevertragsvorlage
Verfügbar
ab Version 2021.1
Handbuch
- Dokumentation → Stammdaten → Servicevertragsvorlagen → Servicevertragsvorlage | Stammdaten
Rechnungen
Kundenrechnungen als PDF in das Kundenarchiv
Änderungsgrund
Bei einer Rechnungserstellung (Angebot wird zur Rechnung abgeschlossen) wird eine Rechnung nur dann in das Kundenarchiv gespeichert, wenn an der Dokumentvorlage die Option → 'Dokument archivieren' gesetzt ist. Hierbei wird allerdings die Rechnung im Ursprungsformat (LibreOffice im ODT-Format) gespeichert. Je nach gesetzter Option an der Dokumentvorlage (siehe auch → 'Archiv Druckvorschau') kann die Rechnung nachträglich ggf. bearbeitet werden.
Verwendung
Bei der Rechnungserstellung (Angebot wird zur Rechnung abgeschlossen) wird immer automatisch ein PDF-Dokument in das Kundenarchiv gespeichert, wenn die Filialkettenoption → 'Kundenrechnungen immer als PDF im Archiv speichern' gesetzt ist.
Verfügbar
ab Version 2021.1
Handbuch
- Dokumentation → Filialverwaltung → Filialketten → Rechnung 1 | Filialverwaltung
Kundenrechnungen als PDF per E-Mail
Änderungsgrund
Möchten Kunden eine Rechnung (z. B. Quartalsrechnung von Serviceverträgen) per E-Mail als PDF erhalten, dann musste man bisher jeden Kunden einzeln öffnen, um dann über die Vorschau der Rechnung diese per E-Mail zu versenden.
Verwendung
Über das 'Mehr-Menü' in den Auswertungen der Rechnungen, können Rechnungen als PDF-Anhang per E-Mail versendet werden. Dabei wird zum einen angezeigt, welche Kunden eine Rechnung per E-Mail wünschen und zum anderen kann für den Versand eine Dokumentvorlage ausgewählt werden. Diese generiert den Text der E-Mail an den Kunden.
Voraussetzung(en)
- SMTP Schnittstelle (siehe auch → SMTP Postausgangsserver | Schnittstelle)
- Kunden-Adresse vom Typ 'Rechnungsadresse' mit gültiger E-Mail-Adresse (siehe auch → Adressen | Kunde)
- Dokumentvorlage vom Typ 'Kunde Benachrichtigung' (siehe auch → Dokumentvorlagen | Stammdaten)
- Die Option am Kunden 'Rechnungen per Post' muss deaktiviert sein (siehe auch → Administration | Kunde)
E-Learning
- folgt
Verfügbar
ab Version 2021.2
Handbuch
- Dokumentation → Auswertungen → Rechnungen, Angebote → Rechnungen | Auswertungen
Reason for change Until now, multiple customers could only be added to a selection by repeatedly using the search criterion "Customer". | |
Solution The search criterion "Customer" has been renamed to "Customers" in the new AMPAREX release. Using it now, one can choose several customers from one dialogue at once. It is also possible to use this criterion to scan customer numbers or barcodes using a scanner. | |
Availability from Version 2021.1 |
Branch office administration
Additional permissions
Reason for change In AMPAREX, user group authorisations could only be assigned at the module, section or tab level. A finer subdivision of user rights was not possible in the past releases. For example, a user who had access to the "Invoice" tab could carry out all actions that were possible on this tab. | |
Solution Starting with the new release more detailed authorisations can be assigned to each "Authorisation group" using the "Additional permissions" (options depend on the selection made in the authorisation menu) - e.g. the right to credit customer invoices. | |
Requirement(s)
| |
Availability from Version 2021.3 |
Branch groups
Reason for change Up to now, branches could only be marked as regular branches or head office branches. It was not possible to combine several (franchise) branches into one group. | |
Solution Using the new branch groups, several branches can be combined into a group that, for example, can neither see the inventory nor the customers of another branch organisation. Branch groups can be created in the >>Branch Office Management module and individual branches can be then assigned to such groups. | |
Availability from Version 2021.2 |
Changelog for chain settings
Reason for change Changes applied to the >>Chain settings could previously only be viewed by using the changelog option in the statistics. | |
Solution Changes applied to the >>Chain settings can be viewed directly by using the "Additional features" changelog. | |
Requirement(s)
| |
Availability from Version 2021.2 |
Article number search
Solution If the function "Search using article number in the article search field" is activated, an additional search, using the article number, can be carried out in the article catalogue. | |
Availability from Version 2021.2 |
Change customer status of several customers at once
Solution The "Additional functions" menu can be extended with a function "Change status" by applying an additional setting to the >>Master setting, namely "marketing_selection_modify_customer_status" and assigning a "true" value to it. After completion a different status can be assigned to a selected group of customers. | |
Availability from Version 2021.1 |
Change stock quantity for a provision of test hearing aid(s)
Reason for change If additional articles (e.g. batteries or receivers) were given to the customer together with the test hearing aids, then no stock movements were recorded for those articles until now meaning that the stock was not reduced and was not corrected when the test hearing aids (and the additional articles) were returned by the customer. | |
Solution The above has been corrected in the new AMPAREX release. You would need to activate the option "Change the quantity in stock also when issuing additional articles together with test hearing aids" under >>Branch office administration >>Processes. This will trigger a stock movement for the test hearing aids and accompanying articles to be recorded. This means that the stock levels will be reduced during the hand out of test hearing aids (and accompanying articles). When the articles are returned by the customer, the stock level will go up again. If the stock has already been reduced by the output, no further action will take place during the sale. | |
Availability from Version 2021.2 |
Service contracts
Service contract templates with customer programmes
Reason for change Customer loyalty programmes and service contracts could have been used together, but until now they had to be created separately. It could have happened that only the service contract was created but the corresponding customer loyalty programme was forgotten to be added to the customer's file or vice versa. | |
Solution An existing customer loyalty programme can be attached to the service contract template. If a service contract is created for a customer using such template, the stored customer loyalty programme will be automatically added to the selected customer’s file and is immediately activated. | |
Requirement(s)
| |
Availability from Version 2021.2 |
Summary information in the Service Contract Wizard
Reason for change As long as an appropriate service contract template was available in the system a service contract could be created with the help of the "Service Contract Wizard". However, in the wizard itself, the data was not accordingly summarised. | |
Solution We've added a separate summary page in the above mentioned wizard with the most important points being displayed on it again for information. These are: Start, End, Article, Price, Billing mode (monthly, yearly) and the Payment type (only the type, not the complete bank details).The behaviour of the wizard has been adjusted so that the price of the respective article from the master data will be displayed on the first page of the wizard (article selection). Please note that this column will only be displayed if no "price formula" was stored in the service contract template. | |
Requirement(s)
| |
Availability from Version 2021.2 |
Duration in days
Reason for change The duration of a service contract could only be specified in months - a duration, e.g. of 14 days, was not possible. | |
Solution In the service contract template, the duration can be specified not only in months but also in days now. The upper limit for entry in days is 1.000. | |
Requirement(s)
| |
Availability from Version 2021.1 |
Invoices
Customer invoices as PDF in the customer archive
Reason for change When an invoice was created in AMPAREX it was saved to the customer archive, provided the invoice template was set to be archived. However, the invoice was saved in its original LibreOffice .odt format. | |
Solution When raising an invoice, a .pdf copy of it can be automatically saved to the customer archive provided the setting "Always save customer invoices as PDFs to the archive" has been activated in the >>Chain settings. | |
Availability from Version 2021.1 |
Send customer invoices as a PDF per e-mail
Reason for change If customers preferred to receive their invoices per e-mail as a .pdf, AMPAREX users had to open each customer individually in order to then send the invoices per email using the invoice preview function. | |
Solution Invoices can be sent as .pdf attachments per mail directly using the "Additional functions" feature on the invoice overview page. | |
Requirement(s)
| |
Availability from Version 2021.2 |
SEPA customer transfer file
Reason for change AMPAREX supports the creation of direct debit files for open invoices. Sometimes there are also overpaid invoices when payments were transferred twice by mistake. Some of you wished to be able to generate a SEPA transfer file for overpaid invoices as well so you could transfer this to your banking software. | |
Solution Mark the corresponding invoices on the customer page and then select "SEPA transfer" from the "Additional functions" menu. | |
Requirement(s)
| |
Availability from Version 2021.2 |
SEPA supplier transfer file
Reason for change Until now, it was not possible to create a SEPA transfer file for purchase invoices in the >>Inventory management module on AMPAREX. | |
Solution To create a SEPA transfer file for a purchase invoice, first select the invoice, then select the command "SEPA transfer" from the >>Additional functions menu. In the following dialogue, the target directory of the SEPA file to be saved into could be specified. | |
Requirement(s)
| |
Availability from Version 2021.2 |
Cost coverage
Reason for change Setting the option "Free of own contribution" in the offer was meant to overwrite sales prices of all articles having cost coverage. In other words for the invoice positions without cost coverage, the sales price would be set to 0.00. This would create an own contribution free offer for the customer. However this would be done regardless, and if certain invoice positions should bring the costs the customer the system would zero them out. | |||||
Solution For the application types "Audiology" and "Optics", you can specify whether all offer positions are to be "Free of own contribution" or only those positions which have cost coverage.
| |||||
Requirement(s)
| |||||
Availability from Version 2021.2 |
Inventory management
Internal requisitions
Reason for change Internal requisitions could previously only be sent or rejected. No additional articles could have been added to a requisition and the quantity could not have been changed either. This meant that additional internal deliveries and delivery notes had to be created. | |
Solution The "Internal requisition" tab has been enhanced with new features. There are now two options for sending requests from other branches:
| |
Requirement(s)
| |
Availability from Version 2021.2 |
Reject ordering - articles on a pick list
Reason for change Branches could create order requests (>>Pick list) that were processed by the head office later. Up to now, it was not possible to reject such orders from the head office. | |
Solution During the order requests processing, an order request can be rejected giving a reason. The ordering branch will receive a corresponding message. | |
Requirement(s)
| |
Availability from Version 2021.2 |
Different VAT rates in a purchase invoice
Reason for change In the past only a fixed VAT rate could be selected for each article, if there were different VAT rates from different accounting periods it wouldn’t be possible to adjust them. | |
Solution In addition to the current VAT rate any other VAT rate in percent can also be entered for each invoice position in a purchase invoice. | |
Requirement(s)
| |
Availability from Version 2021.1 |
AMPAREX format for purchase invoices
Solution Electronic purchase invoices saved in AMPAREX format can be imported in AMPAREX. | |
Requirement(s)
| |
Availability from Version 2021.2 |
Change several order positions
Reason for change Up to now, only a single position in an order could be adjusted. If an order had several similar articles and all of them had to be changed to the same quantity, it would only be possible to do so individually per article. | |
Solution Using the multiple selection, several articles can be selected at the same time. Then, the quantity can be changed in the "Quantity" field. If you change the quantity, this change will affect all selected positions. The same applies to all other editable fields. The only exceptions are the fields: "Article" and "Colour". | |
Requirement(s)
| |
Availability from Version 2021.2 |
Saved inventory parameters
Reason for change Inventories can be created and edited in AMPAREX. However, if one wanted to find out which parameters were used to create an inventory, it was just not possible to do so. Until now, the parameters used to create an inventory were simply not saved. It was therefore not possible to trace down how the inventory was created. | |
Solution The parameters with which an inventory was created (whether manually or using a template) will be saved in the respective inventory and can be viewed subsequently under >>Inventory >>Additional functions >>Show inventory parameters. | |
Requirement(s)
| |
Availability from Version 2021.2 |
Services
Connection to TIMIFY for online appointment booking
Reason for change TIMIFY is a software solution for online appointment booking and resource management. An overview of the services and functions of TIMIFY can be found → here. Please note that currently AMPAREX only supports the Enterprise version of TIMIFY. For questions directly related to the TIMIFY interfaces (e.g. setup, operation, etc.), please contact the TIMIFY support directly. | |
Solution A connection to TIMIFY can be set up via AMPAREX interface. You can find a detailed setup article (in German) → here. | |
Requirement(s)
| |
Availability from Version 2021.3 |
Bookkeeping
Define your own booking batches
Reason for change Several users work in parallel on the same booking batch and can potentially interfere with each other. | |
Solution We’ve added a possibility to group booking batches and filter the list of booking batches accordingly. One or more selected booking batches can be assigned to a new booking batch. An existing booking batch can be selected or a new booking batch can be added. This way, each user can define own booking batches to be processed. When worked on, such groups will be removed. | |
Availability from Version 2021.2 |
Writing off an unpaid invoice
Reason for change A bad debt could be written off in the >>Bookkeeping on AMPAREX. Having this information easily visible in the customer’s file could be also very important, but it was not displayed until now. | |
Solution If an invoice is written off in the >>Bookkeeping on AMPAREX, this information will appear in the customer overview in the field "Amount" (the field will be highlighted in yellow). In addition, a tooltip will indicate which invoice it is. Should the invoice be later paid by the customer, this yellow highlighting can be reset via the "Additional functions" menu under >>Invoices directly in the customer module. | |
Requirement(s)
| |
Availability from Version 2021.2 |
Noah / Audiograms
Noah Alert Dashboard
Solution The "Noah Alert Dashboard" was first introduced to Noah System 4.12. The feature can be potentially used to alert the hearing care professional to important information from customers. To send an alert, customers can send "alerts" messages to their hearing care professional using a mobile app (to be provided by the respective hearing aid manufacturer) - e.g. the customer is sitting in the restaurant in the evening and notices a malfunction in his hearing aid. He opens the hearing aid manufacturer app and sends an alert/info message to his audiologist. The next day, the audiologist sees this info on the >>My AMPAREX reminder page and can react to it. When the alert is read, the notification and info will removed from the reminder page.
| ||||||
Requirement(s)
| ||||||
Availability from Version 2021.2 |
Noah Engine 4.13
Solution Noah Engine 4.13 is supported on AMPAREX and can be downloaded via the AMPAREX download page or using the "Download Noah 4.13" button >>Desktop settings >>Noah settings on AMPAREX. | |
Availability from Version 2021.3 |
Audiological assessment
Reason for change Access to Noah measurement’s assessment (CI candidate, CPT coding rules, WHO grades of hearing impairment, total hearing loss (CH) or social index (CH)) was previously only possible via >>Additional functions menu under >>Audiograms. A comparative overview or a complete presentation was therefore not possible. | |
Solution Country/region-specific assessment of a selected audiogram are displayed on the audiogram page now. Additionally, the selection for WHO grades of hearing impairment has been improved so that only the best side is automatically searched for. If the assessment of the audiogram shows that the customer is a potential CI candidate, an implant process can be started straight away by pressing the "Implant" button. Possible CI candidates can be searched for under >>Form letter, selection using the criterion "Sound audiogram", so that they can be contacted directly. The information from the CI assessments can be added to documents printed from AMPAREX. Please note that in order to do so document templates need to be enhanced with the following placeholders:
| |
Requirement(s)
| |
Availability from Version 2021.3 |
SEPA Kunden Überweisungsdatei
Änderungsgrund
AMPAREX unterstützt die Erstellung von Lastschriftdateien für offene Rechnungen. Manchmal gibt es auch überbezahlte Rechnungen (z. B.) bei Doppelüberweisung. Es bestand der Wunsch, auch für überbezahlte Rechnungen eine SEPA Überweisungsdatei erzeugen zu können, um diese dann dem Banking-Programm zu übergeben.
Verwendung
Man markiert die entsprechenden Rechnungen auf der Kundenseite und wählt anschließend im Mehr-Menü den Punkt 'SEPA Überweisungsdatei erstellen' aus.
Voraussetzung(en)
- eine überbezahlte Rechnung
Info | ||
---|---|---|
| ||
|
Verfügbar
ab Version 2021.2
Handbuch
- Dokumentation → Kunden → Rechnungen → Rechnungsübersicht | Kunde
SEPA Lieferanten Überweisungsdatei
Änderungsgrund
Für eine Eingangsrechnung in der Lagerverwaltung konnte bisher keine SEPA-Überweisungsdatei erstellt werden.
Verwendung
Um für eine Eingangsrechnung eine SEPA-Überweisungsdatei zu erstellen, wählt man nun erst die Rechnung, dann über das Mehr-Menü den Befehl 'SEPA Überweisungsdatei erstellen' aus. Im nachfolgenden Dialog kann das Zielverzeichnis der, zu speichernden, SEPA-Datei angegeben werden.
Voraussetzung(en)
- mindestens eine Eingangsrechnung
Info | ||
---|---|---|
| ||
|
Verfügbar
ab Version 2021.2
Handbuch
- Dokumentation → Lagerverwaltung → Eingangsrechnungen → Eingangsrechnung | Lagerverwaltung
Kostenübernahme
Änderungsgrund
Mit Setzen der Option 'Eigenanteilsfrei' im Angebot, werden die Verkaufspreise von Angebotspositionen überschrieben, für die eine Kostenübernahme durch den Kostenträger vorhanden ist. In Positionen ohne Kostenübernahme wird der Verkaufspreis auf 0,- gesetzt. Dies erstellt ein, für den Kunden, komplett eigenanteilsfreies Angebot. Dies ist unabhängig davon, ob tatsächlich in jeder Position eine Kostenübernahme erfolgt.
Verwendung
Für die Anwendungstypen 'Akustik' bzw. 'Optik' kann angegeben werden, ob generell alle Positionen 'eigenanteilsfrei' sein sollen oder nur die Positionen, bei denen auch eine Kostenübernahme stattfindet.
Standardeinstellung für die Hörakustik → immer anpassen | |
Standardeinstellung für die Augenoptik → nur anpassen, wenn Kostenübernahme vorhanden |
Voraussetzung(en)
- Eigenanteilsfreie Artikelpositionen mit bzw. ohne Kostenübernahme
Verfügbar
ab Version 2021.2
Handbuch
- Dokumentation → Filialverwaltung → Filialkette → Kostenträger | Filialverwaltung
Lagerverwaltung
Anforderungen aus anderen Filialen
Änderungsgrund
Anforderungen konnten bisher nur direkt versendet oder abgelehnt werden. Einer Anforderung konnte keine weitere Ware hinzugefügt und die Menge geändert werden. Das führte dazu, dass weitere Lieferungen bzw. Lieferscheine erstellt werden mussten.
Verwendung
Die Maske 'Anforderungen aus anderen Filialen' im Warenausgang wurde angepasst. Hier stehen jetzt zwei Möglichkeiten zum Versenden von Anforderungen aus anderen Filialen zur Verfügung:
- 'Direkt versenden' - das Verhalten ist wie bisher. Die selektierten Artikel werden direkt und ohne Rückfrage in der Filiale gebucht, aus der die Anforderung stammt. Zusätzlich kann ein (Begleit-) Lieferschein gedruckt werden
- Über die Schaltfläche 'In Warenausgang' werden die selektierten Artikel in den Warenausgang übernommen. Hierbei können der Lieferung noch weitere Artikel hinzugefügt oder die Menge der angeforderten Artikel angepasst werden (bei mengenverwalteten Artikeln)
Die direkte Bearbeitung der Artikelposition in der Maske 'Anforderung aus anderen Filialen' entfällt.
Voraussetzung(en)
- Anforderung aus mindestens einer anderen Filiale
E-Learning
- folgt
Verfügbar
ab Version 2021.2
Handbuch
- Dokumentation → Lagerverwaltung → Warenausgang → Reiter 'Anforderungen aus anderen Filialen | Lagerverwaltung'
Bestellwünsche ablehnen
Änderungsgrund
Filialen können Bestellwünsche anlegen, die durch die Zentrale bearbeitet werden. Hier war es bisher nicht möglich, einen Bestellwunsch abzulehnen.
Verwendung
Werden Bestellwünsche bearbeitet, kann ein Bestellwunsch mit einem Grund abgelehnt werden. Die bestellende Filiale erhält dazu eine entsprechende Nachricht.
Voraussetzung(en)
- Bestellwunsch aus mindestens einer anderen Filiale
Verfügbar
ab Version 2021.2
Handbuch
- Dokumentation → Lagerverwaltung → Bestellungen → Bestellwünsche | Lagerverwaltung
Verkaufspreis bei Schmuck & Uhren
Verwendung
Beim Einlagern von allgemeinen Artikeln kann ein individueller Verkaufspreis angegeben werden.
Voraussetzung(en)
- Artikel-Typ 'Schmuck' oder 'Uhr'
- Nummernverwalteter Artikel
Verfügbar
ab Version 2021.3
Handbuch
- Dokumentation → Lagerverwaltung → Wareneingänge → Wareneingang → Allgemeine Artikel | Wareneingang
Unterschiedliche Mehrwertsteuersätze in einer Eingangsrechnung
Änderungsgrund
Gibt es unterschiedliche Steuersätze (z. B. wegen MwSt. Anpassung) aus unterschiedlichen Buchungsperioden, dann konnte bisher nur ein fester Mehrwertsteuersatz ausgewählt werden.
Verwendung
In den Eingangsrechnungen der Lagerverwaltung kann neben den vorbelegten Steuersätzen 'volle Mehrwertsteuer', 'reduzierte Mehrwertsteuer' und 'keine Mehrwertsteuer' auch ein beliebiger Steuersatz in Prozent angegeben werden. Ist dies der Fall, entfällt die Anzeige/Vorbelegung aus der Klappliste 'VSt.'.
Voraussetzung(en)
- abweichender MwSt. Satz
Verfügbar
ab Version 2021.1
Handbuch
- Dokumentation → Lagerverwaltung → Eingangsrechnungen → Eingangsrechnung → Reiter 'Lieferungen' | Lagerverwaltung, Eingangsrechnungen
AMPAREX Format für Eingangsrechnungen
Verwendung
Für Eingangsrechnungen in der Lagerverwaltung können im Rechnungswesen elektronische Eingangsrechnungen im AMPAREX Format importiert werden.
Voraussetzung(en)
- CSV-Datei (UTF-8 Kodierung)
Verfügbar
ab Version 2021.2
Handbuch
- Dokumentation → Rechnungswesen→ Eingangsrechnungsimporte → Dialog 'Eingangsrechnungsimport'→ AMPAREX Format | Eingangsrechnungsimport
Kasse
Transaktionsdaten exportieren
Verwendung
Alle TSE-Datenprotokolle können zur Weitergabe/Überprüfung z. B. im 'DSFinV-K Format' exportiert werden. Hierbei wählt man entweder eine Zeitspanne aus (max. 1 Monat) oder alle TSE-Daten (hierbei aber ohne DSFinV-K). Danach wählt man den Speicherort der Datei aus.
Info | ||
---|---|---|
| ||
Die DSFinV-K ist die Beschreibung einer Schnittstelle für den Export von Daten aus elektronischen Aufzeichnungssystemen für die Datenträgerüberlassung im Rahmen von Außenprüfungen sowie Kassen-Nachschauen (Betriebsprüfung). |
Verfügbar
ab Version 2021.1
Handbuch
- Dokumentation → Kasse → Administration → TSE-Datenprotokoll | Kasse
- Dokumentation → Kasse → Kassenbücher → Kassenschnitte | Kasse
Schnittstellen
Anbindung zu TIMIFY der Online Terminbuchung (AX-10263)
Änderungsgrund
'TIMIFY' ist eine Softwarelösung zur Online-Terminvereinbarung von Raum- und Ressourcenverwaltung. Eine Übersicht der Leistungen und Funktionen von 'TIMIFY' finden sie → hier bzw. funktioniert die AMPAREX Schnittstellen ausschließlich nur mit der 'Enterpriese' Version von 'TIMIFY'. Für Fragen die sich direkt auf die 'TIMIFY-Oberfläche' beziehen (z. B. Einrichtung, Bedienung etc.) wenden Sie sich bitte direkt an den 'TIMIFY-Support'.
Verwendung
Die Verbindung zu TIMIFY wird über eine AMPAREX Schnittstelle eingerichtet. Einen ausführlichen Einrichtungsartikel der Firma 'TIMIFY' finden sie → hier.
Voraussetzung(en)
- AMPAREX API Zugang (mit weiteren Kosten verbunden)
- TIMIFY Enterprise Zugang (mit weiteren Kosten verbunden)
Verfügbar
ab Version 2021.3
Handbuch
- Dokumentation → Filialverwaltung → Schnittstellen → Back-Office → TIMIFY | Schnittstellen
KSV1870 Bonitätsprüfung
Verwendung
Neue Schnittstelle zur Abfrage der Bonität eines Kunden. Es werden immer alle zur Personensuche verfügbaren Daten wie Name, Vorname, Geburtsdatum, PLZ, Stadt, Straße, Hausnummer übergeben. Der Nachname muss auf jeden Fall identisch mit dem gespeicherten Datensatz sein. Die eigentliche Abfrage erfolgt in der Kundenmaske über das Mehr-Menü oder über das 'Ampel-Symbol'. Die Bonität des Kunden wird als Farbabstufung in Rot (schlechte Bonität), Gelb (mittlere Bonität) und Grün (gute Bonität) dargestellt.
Voraussetzung(en)
- Vertrag mit der 'KSV1870' zur Verwendung der Schnittstelle 'Auskünfte über Personen'. Hierdurch erhalten Sie die notwendigen Zugangsdaten.
Landesspezifisch
- Österreich
Verfügbar
ab Version 2021.1
Handbuch
- Dokumentation → Filialverwaltung → Schnittstellen →Bonitätsprüfung → KSV1870 | Schnittstelle
Buchhaltung
Eigene Buchungsstapel definieren
Änderungsgrund
Mehrere Benutzer arbeiten parallel an derselben Liste des Buchungsstapels und können sich potentiell gegenseitig stören.
Verwendung
Möglichkeit Buchungsstapel zu gruppieren und die Liste der Buchungsstapel danach zu filtern. Eine oder mehrere selektierte Buchungsstapel können einem neuen Buchungsstapel zugewiesen werden. Dabei kann ein bestehender Buchungsstapel ausgewählt oder ein neuer Buchungsstapel eingegeben werden. Somit kann sich jeder Mitarbeiter einen eigenen zu bearbeitenden Buchungsstapel definieren. Beim Verbuchen wird diese Gruppierung wieder entfernt.
Verfügbar
ab Version 2021.2
Handbuch
- Dokumentation → Buchhaltung → Buchungsstapel → Buchungsstapel | Buchhaltung.
Erlösschmälerung buchen/zurücknehmen
Änderungsgrund
Eine uneinbringliche Forderung bzw. eine Begleichung einer Rechnung per Zahlungsart 'Inkasso' kann in der Buchhaltung ausgebucht werden. Diese Information kann in der Kundenübersicht wichtig sein, wurde aber bisher nicht angezeigt.
Verwendung
Wird eine Rechnung per Erlösschmälerung in der Buchhaltung in AMPAREX ausgebucht, erscheint diese Information in der Kundenübersicht im Feld 'Betrag' (Feld wird gelb unterlegt). Zusätzlich zeigt ein Tooltip auf diesem Feld an, um welche Rechnung es sich dabei handelt. Sollte die Rechnung später doch noch von dem Kunden beglichen werden, kann dieses 'Kennzeichen' über das 'Mehr-Menü' in den Rechnungen des Kunden wieder zurück gesetzt werden.
Voraussetzung(en)
- 'uneinbringliche' Forderung (offene Rechnung)
E-Learning
- folgt
Verfügbar
ab Version 2021.2
Handbuch
- Dokumentation → Buchhaltung → Buchungsstapel → Buchungsstapel | Buchhaltung
- Dokumentation → Kunden → Rechnungen → Rechnungsübersicht | Kunde
Anzahlungen versteuern
Änderungsgrund Eingehende Anzahlungen sollen zusätzlich auf ein gesondertes Konto und nicht nur gegen den Debitor gebucht werden können. Dies ist eine Anforderung aus der Schweiz. | |
Verwendung In allen Ländern bis auf Deutschland, kann per Filialketteneinstellung die Verbuchung der Umsatzsteuer für Anzahlungen aktiviert werden. Diese Einstellung entspricht nicht dem Standard und sollte nur mit Bedacht eingeschaltet werden. | |
Voraussetzung(en)
| |
Landesspezifisch
| |
Verfügbar ab Version 2021.2 | |